#!version:1.0.0.1 ##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.## ##This template file is applicable to SIP-T28P/T26P/T22P/T20P/T21P/T19P/T46G/T42G/T41P IP phones running firmware version 72 or later.## ##For more information on configuration parameters, refer to Yealink_SIP-T2_Series_T19P_T4_Series_IP_Phones_Auto_Provisioning_Guide.## ####################################################################################### ## Account1 Basic Settings ## ####################################################################################### account.1.enable = 1 account.1.label = 82301 account.1.display_name = 82301 account.1.auth_name = 82301 account.1.user_name = 82301 account.1.password = W@t3r5t0n35 account.1.sip_server.1.address = 10.230.163.61 account.1.outbound_proxy_enable = account.1.outbound_host = account.1.outbound_port = account.1.dial_tone = ##It configures the transport type for account 1. 0-UDP,1-TCP,2-TLS,3-DNS-NAPTR ##The default value is 0. account.1.sip_server.1.transport_type = account.1.sip_server.2.transport_type = ####################################################################################### ## Failback ## ####################################################################################### account.1.naptr_build = account.1.fallback.redundancy_type = account.1.fallback.timeout = account.1.sip_server.1.address = account.1.sip_server.1.port = account.1.sip_server.1.expires = account.1.sip_server.1.retry_counts = account.1.sip_server.1.failback_mode = account.1.sip_server.1.failback_timeout = account.1.sip_server.1.register_on_enable = account.1.sip_server.2.address = account.1.sip_server.2.port = account.1.sip_server.2.expires = account.1.sip_server.2.retry_counts = account.1.sip_server.2.failback_mode = account.1.sip_server.2.failback_timeout = account.1.sip_server.2.register_on_enable = account.1.dns_cache_type = account.1.static_cache_pri = account.1.register_expires_overlap = account.1.subscribe_expires_overlap = ####################################################################################### ## Time ## ####################################################################################### ##It configures the time zone.For more available time zones, refer to Time Zones on page 215. ##The default value is +8. local_time.time_zone = 0 ##It configures the time zone name.For more available time zone names, refer to Time Zones on page 215. ##The default time zone name is China(Beijing). local_time.time_zone_name = United Kingdom(London) local_time.ntp_server1 = 10.230.160.70 local_time.ntp_server2 = 10.253.160.70 ##It configures the update interval (in seconds) when using the NTP server. ##The default value is 1000.Integer from 15 to 86400 local_time.interval = ##It enables or disables daylight saving time (DST) feature. ##0-Disabled,1-Enabled,2-Automatic. ##The default value is 2. local_time.summer_time = 2 ##It configures the way DST works when DST feature is enabled. ##0-DST By Date ,1-DST By Week. ##The default value is 0. local_time.dst_time_type = ##It configures the start time of the DST. ##Value formats are:Month/Day/Hour (for By Date),Month/ Day of Week/ Day of Week Last in Month/ Hour of Day (for By Week) ##The default value is 1/1/0. local_time.start_time = ##It configures the end time of the DST. ##Value formats are:Month/Day/Hour (for By Date),Month/ Day of Week/ Day of Week Last in Month/ Hour of Day (for By Week) ##The default value is 12/31/23. local_time.end_time = ##It configures the offset time (in minutes). ##The default value is blank.Integer from -300 to 300 local_time.offset_time = ##It configures the time format.0-12 Hour,1-24 Hour. ##The default value is 1. local_time.time_format = local_time.date_format = 3 ##It enables or disables the phone to update time with the offset time obtained from the DHCP server. ##It is only available to offset from GMT 0.0-Disabled,1-Enabled. ##The default value is 0. local_time.dhcp_time = 0 ##It configures the phone to obtain time from NTP server or manual settings.0-Manual,1-NTP ##The default value is 1. local_time.manual_time_enable = 1 ##It enables or disables the phone to use manually configured NTP server preferentially. ##0-Disabled (use the NTP server obtained by DHCP preferentially),1-Enabled. ##The default value is 0. local_time.manual_ntp_srv_prior = 1 auto_dst.url = http://files.yealink.co.uk/2/autop/Waterstones/AutoDST.xml features.missed_call_popup.enable = 0 ####################################################################################### ## Register Advanced ## ####################################################################################### ##It configures the SIP server type for account X.0-Default,2-BroadSoft,4-Cosmocom,6-UCAP ##The default value is 0. account.1.sip_server_type = account.1.unregister_on_reboot = account.1.proxy_require = account.1.srv_ttl_timer_enable = account.1.register_mac = account.1.register_line = account.1.reg_fail_retry_interval = ###################################################################################### ## NAT Settings ## ###################################################################################### ##It enables or disables the NAT traversal for account X.0-Disabled,1-Enabled ##The default value is 0. account.1.nat.nat_traversal = ##It configures the IP address or domain name of the STUN server for account X. ##The default value is blank. ##It configures the port of the STUN server for account X. ##The default value is 3478. ##It configures the type of keep-alive packets sent by the phone to the NAT device to keep the communication port open so that NAT can continue to function for account X. ##0-Dsiabled,1-Default: the phone sends UDP packets to the server,2-Option: the phone sends SIP OPTION packets to the server,3-Notify: the phone sends SIP NOTIFY packets to the server. ##The default value is 1. account.1.nat.udp_update_enable = ##It configures the keep-alive interval (in seconds) for account X. ##The default value is 30.Integer from 15 to 2147483647 account.1.nat.udp_update_time = ##It enables or disables NAT Rport feature for account X.0-Disabled,1-Enabled ##The default value is 0. account.1.nat.rport = ####################################################################################### ## Account1 Advance Settings ## ####################################################################################### ##It configures the voice mail number for account X. ##The default value is blank. voice_mail.number.1 = ##Except T19P/T21P Models account.1.auto_dial_enable = account.1.auto_dial_num = account.1.call_id_mode = account.1.call_info = ####################################################################################### ## Subscribe ## ####################################################################################### ##It enables or disables the phone to subscribe the message waiting indicator for account X.0-Disabled,1-Enabled. ##The default value is 0. account.1.subscribe_mwi = ##It is configuration MWI is NOTIFY messages, whether in Terminated status attributes. ##The default value is 0(Don't handle terminated values) account.1.mwi_parse_terminated = ##It configures the interval (in seconds) of MWI subscription for account X. ##The default value is 3600. account.1.subscribe_mwi_expires = ##It enables or disables the phone to subscribe to the voice mail number for the message waiting indicator for account X.0-Disabled,1-Enabled. ##The default value is 0. account.1.subscribe_mwi_to_vm = ##It configures the period (in seconds) of ACD subscription for account X. ##The default value is 1800.Except T19P/T21P Models account.1.subscribe_acd_expires= account.1.display_mwi.enable= ####################################################################################### ## BLF List(Except T19D Model) ## ####################################################################################### ##It configures the BLF List URI to monitor a list of users for account X. ##The default value is blank. account.1.blf.blf_list_uri = ##It configures the feature access code for directed call pickup (default: *97) for account X. ##The default value is blank. account.1.blf_list_code = ##It configures the feature access code for directed call pickup with barge-in (default: *33) for account X. ##The default value is blank. account.1.blf_list_barge_in_code = ##It configures the period (in seconds) of the BLF subscription for account X. ##The default value is 1800.Integer from 30 to 2147483647. account.1.blf.subscribe_period = ##It configures the event of the BLF subscription for account X.0-Dialog,1-Presence. ##The default value is 0. account.1.blf.subscribe_event = ##It enables or disables the phone to handle NOTIFY messages out of the BLF dialog for account X.0-Disabled,1-Enabled. ##The default value is 0. account.1.out_dialog_blf_enable = ##It configures the BLF List Retrieve call parked code for account X. ##The default value is blank account.1.blf_list_retrieve_call_parked_code = account.1.blf.match_host.enable= ####################################################################################### ## BLA/SCA ## ####################################################################################### ##It enables or disables Broadsoft SCA feature for account X.0-Disabled,1-Broadsoft SCA. ##The default value is 0. account.1.shared_line = ##It configures the BLA number for account X. ##The default value is blank. account.1.bla_number = ##It configures the period (in seconds) of BLA subscription for account X. ##The default value is 300.Integer from 60 to 7200 account.1.bla_subscribe_period = ##Except T19P/T21P Models ##It configures the Call Pull Feature access code for account X. ##The default value is blank. account.1.shared_line_callpull_code = ##It configures number of linekey for line. ##The default value is 1. account.1.number_of_linekey = ####################################################################################### ## Brosoft Callpark ## ####################################################################################### ##It enables or disables Broadsoft Callpark for account X.0-Disabled,1-Broadsoft SCA. ##The default value is 0. account.1.callpark_enable = ####################################################################################### ## Audio Codec ## ####################################################################################### ###T19D/T21D support codec1~codec8 ###T20P/T22P/T26P/T28P/T41P/T42G/T46G support codec1~codec11 account.1.codec.1.enable = account.1.codec.1.payload_type = account.1.codec.1.priority = account.1.codec.1.rtpmap = account.1.codec.2.enable = account.1.codec.2.payload_type = account.1.codec.2.priority = account.1.codec.2.rtpmap = account.1.codec.3.enable = account.1.codec.3.payload_type = account.1.codec.3.priority = account.1.codec.3.rtpmap = account.1.codec.4.enable = account.1.codec.4.payload_type = account.1.codec.4.priority = account.1.codec.4.rtpmap = account.1.codec.5.enable = account.1.codec.5.payload_type = account.1.codec.5.priority = account.1.codec.5.rtpmap = account.1.codec.6.enable = account.1.codec.6.payload_type = account.1.codec.6.priority = account.1.codec.6.rtpmap = account.1.codec.7.enable = account.1.codec.7.payload_type = account.1.codec.7.priority = account.1.codec.7.rtpmap = account.1.codec.8.enable = account.1.codec.8.payload_type = account.1.codec.8.priority = account.1.codec.8.rtpmap = account.1.codec.9.enable = account.1.codec.9.payload_type = account.1.codec.9.priority = account.1.codec.9.rtpmap = account.1.codec.10.enable = account.1.codec.10.payload_type = account.1.codec.10.priority = account.1.codec.10.rtpmap = account.1.codec.11.enable = account.1.codec.11.payload_type = account.1.codec.11.priority = account.1.codec.11.rtpmap = ####################################################################################### ## Audio Advanced ## ####################################################################################### ##It configures whether to use voice encryption service for account X.0-Disabled,1-Optional,2-Compulsory. ##The default value is 0. account.1.srtp_encryption = ##It configures the RTP packet time for account X.0 (Disabled), 10, 20, 30, 40, 50 or 60. ##The default value is 20. account.1.ptime = ## The default value is 0(Take a SRTP all encryption).1:Only carry AES - 80 secret key,2: Only carry AES - 32 secret key ####################################################################################### ## Anonymous Call ## ####################################################################################### account.1.send_anonymous_code = account.1.anonymous_call = account.1.anonymous_call_oncode = account.1.anonymous_call_offcode = account.1.reject_anonymous_call = account.1.anonymous_reject_oncode = account.1.anonymous_reject_offcode = account.1.send_anonymous_rejection_code = ####################################################################################### ## Pickup Code ## ####################################################################################### ##It enables or disables the phone to pick up a call according to the SIP header of dialog-info for account X.0-Disabled,1-Enabled. ##The default value is 0. account.1.dialoginfo_callpickup = ##It configures the group pickup code for account X. ##The default value is blank. account.1.group_pickup_code = ##It configures the directed pickup code for account X. ##The default value is blank. account.1.direct_pickup_code = ####################################################################################### ## DTMF ## ####################################################################################### account.1.dtmf.type = account.1.dtmf.info_type = account.1.dtmf.dtmf_payload = ####################################################################################### ## Alert info ## ####################################################################################### ##It enables or disables the distinctive ringtones by the Alert-Info SIP header for account X.0-Disabled,1-Enabled. ##The default value is 0. account.1.alert_info_url_enable = ##Except T19P/T21P Models ##The default value is blank.Values range 256 characters in length account.1.alert_info = account.1.ringtone.ring_type = ###Only for T46G Model ##It enables or disables the phone to download the picture information for account X when receiving an incoming call or during a call.0-Disabled,1-Enabled. ##The default value is 0. account.1.picture_info_enable = ####################################################################################### ## Conference ## ####################################################################################### ##It configures the conference type for account X.0-Local Conference,2-Network Conference. ##The default value is 0. account.1.conf_type = ##It configures the network conference URI for account X. ##The default value is blank. account.1.conf_uri = ####################################################################################### ## CID Source ## ####################################################################################### account.1.cid_source = account.1.cid_source_privacy = account.1.cid_source_ppi = account.1.cp_source = ####################################################################################### ## Session Timer ## ####################################################################################### account.1.session_timer.enable = account.1.session_timer.expires = account.1.session_timer.refresher = ####################################################################################### ## Music on Hold ## ####################################################################################### ##It configures the way on how the phone processes Music On Hold when placing an active call on hold for account X. ##0-Calling the music server before holding ##1-Calling the music server after holding ##The default value is 0. account.1.music_on_hold_type = ##It configures the URI of the Music On Hold server for account X. ##The default value is blank. account.1.music_server_uri = ####################################################################################### ## Advanced ## ####################################################################################### account.1.auto_answer = account.1.missed_calllog = account.1.100rel_enable = account.1.enable_user_equal_phone = account.1.compact_header_enable = account.1.custom_ua = ####################################################################################### ## DND(Except T19 Model) ## ####################################################################################### account.1.dnd.enable = account.1.dnd.on_code = account.1.dnd.off_code = ####################################################################################### ## Call Forward(Except T19 Model) ## ####################################################################################### account.1.always_fwd.enable = account.1.always_fwd.target = account.1.always_fwd.off_code = account.1.always_fwd.on_code = account.1.busy_fwd.enable = account.1.busy_fwd.target = account.1.busy_fwd.off_code = account.1.busy_fwd.on_code = account.1.timeout_fwd.enable = account.1.timeout_fwd.target = account.1.timeout_fwd.timeout = account.1.timeout_fwd.off_code = account.1.timeout_fwd.on_code = ####################################################################################### ## Voice Monitoring (Except T19P/T21P Models) ## ####################################################################################### account.1.vq_rtcpxr.collector_name= account.1.vq_rtcpxr.collector_server_host= account.1.vq_rtcpxr.collector_server_port= ####################################################################################### ## Broadsoft Hoteling ## ####################################################################################### account.1.hoteling.enable = account.1.hoteling.user_id = account.1.hoteling.password = account.1.hoteling.auto_login_enable = ####################################################################################### ## Broadsoft ACD ## ####################################################################################### account.1.acd.enable = account.1.acd.unavailable_reason_enable = account.1.acd.available = account.1.acd.initial_state = ####################################################################################### ## Broadsoft ACD Call Center ## ####################################################################################### account.1.reason_code.1 = account.1.reason_code_name.1 = account.1.bw_disp_code.1 = account.1.bw_disp_code_name.1 = account.1.supervisor_info_code.1 = account.1.supervisor_info_code_name.1 = ####################################################################################### ## Broadsoft Call Center ## ####################################################################################### account.1.call_center.call_info_enable = account.1.call_center.show_call_info_time = account.1.call_center.disp_code_enable = account.1.call_center.trace_enable = account.1.call_center.emergency_enable = account.1.call_center.queue_status_enable = account.1.call_center.queue_status_light_enable = ####################################################################################### ## Broadsoft XSI ## ####################################################################################### ##It configures the user name for XSI authentication for account X.Example:account.1.xsi.user = 3502@as.iop1.broadworks.net. ##The default value is blank. account.1.xsi.user = ##It configures the password for XSI authentication for account X.Example:account.1.xsi.password = 123456. ##The default value is blank. account.1.xsi.password = ##It configures the access URL of the Xtended Services Platform server for account X.Example:account.1.xsi.host = xsp1.iop1.broadworks.net. ##The default value is blank. account.1.xsi.host = ##It configures the server type of the Xtended Services Platform server for account X.Example:account.1.xsi.server_type = http. ##The default value is http. account.1.xsi.server_type = ##It configures the server port of the Xtended Services Platform server for account X.Example:account.1.xsi.port = 80. ##The default value is 80.Integer from 1 to 65535 account.1.xsi.port = ####################################################################################### ## Account2 Basic Settings ## ####################################################################################### account.2.enable = account.2.label = account.2.display_name = account.2.auth_name = account.2.user_name = account.2.password = account.2.outbound_proxy_enable = account.2.outbound_host = account.2.outbound_port = account.2.dial_tone = account.2.sip_server.1.transport_type = account.2.sip_server.2.transport_type = ####################################################################################### ## Failback ## ####################################################################################### account.2.naptr_build = account.2.fallback.redundancy_type = account.2.fallback.timeout = account.2.sip_server.1.address = account.2.sip_server.1.port = account.2.sip_server.1.expires = account.2.sip_server.1.retry_counts = account.2.sip_server.1.failback_mode = account.2.sip_server.1.failback_timeout = account.2.sip_server.1.register_on_enable = account.2.sip_server.2.address = account.2.sip_server.2.port = account.2.sip_server.2.expires = account.2.sip_server.2.retry_counts = account.2.sip_server.2.failback_mode = account.2.sip_server.2.failback_timeout = account.2.sip_server.2.register_on_enable = account.2.dns_cache_type = account.2.static_cache_pri = account.2.register_expires_overlap = account.2.subscribe_expires_overlap = ####################################################################################### ## Register Advanced ## ####################################################################################### account.2.sip_server_type = account.2.unregister_on_reboot = account.2.proxy_require = account.2.srv_ttl_timer_enable = account.2.register_mac = account.2.register_line = account.2.reg_fail_retry_interval = ######################################################################### ## NAT Settings ## ######################################################################### account.2.nat.nat_traversal = account.2.nat.udp_update_enable = account.2.nat.udp_update_time = account.2.nat.rport = ##V80 do not support(T23/T27/T61/T66/T29/T46)## ##account.2.nat.stun_server = ##account.2.nat.stun_port = ####################################################################################### ## Account2 Advance Settings ## ####################################################################################### voice_mail.number.2 = ##Except T19P/T21P Models account.2.auto_dial_enable = account.2.auto_dial_num = account.2.call_id_mode = account.2.call_info = ####################################################################################### ## Subscribe ## ####################################################################################### account.2.subscribe_mwi = account.2.subscribe_mwi_expires = account.2.subscribe_mwi_to_vm = account.2.subscribe_acd_expires= ##Except T19P/T21P Models account.2.display_mwi.enable = ##It is configuration MWI is NOTIFY messages, whether in Terminated status attributes. ##The default value is 0(Don't handle terminated values) account.2.mwi_parse_terminated = ####################################################################################### ## BLF List(Except T19D Model) ## ####################################################################################### account.2.blf.blf_list_uri = account.2.blf_list_code = account.2.blf_list_barge_in_code = account.2.blf.subscribe_period = account.2.blf.subscribe_event = account.2.out_dialog_blf_enable = account.2.blf.match_host.enable= ####################################################################################### ## BLA/SCA ## ####################################################################################### account.2.shared_line = account.2.bla_number = account.2.bla_subscribe_period = ##It configures the Call Pull Feature access code for account X. ##The default value is blank. account.2.shared_line_callpull_code = ##It configures number of linekey for line. ##The default value is 1. account.2.number_of_linekey = ####################################################################################### ## Brosoft Callpark ## ####################################################################################### ##It enables or disables Broadsoft Callpark for account X.0-Disabled,1-Broadsoft SCA. ##The default value is 0. account.2.callpark_enable = ####################################################################################### ## Audio Codec ## ####################################################################################### ###T19D/T21D support codec1~codec8 ###T20P/T22P/T26P/T28P/T41P/T42G/T46G support codec1~codec11 account.2.codec.1.enable = account.2.codec.1.payload_type = account.2.codec.1.priority = account.2.codec.1.rtpmap = account.2.codec.2.enable = account.2.codec.2.payload_type = account.2.codec.2.priority = account.2.codec.2.rtpmap = account.2.codec.3.enable = account.2.codec.3.payload_type = account.2.codec.3.priority = account.2.codec.3.rtpmap = account.2.codec.4.enable = account.2.codec.4.payload_type = account.2.codec.4.priority = account.2.codec.4.rtpmap = account.2.codec.5.enable = account.2.codec.5.payload_type = account.2.codec.5.priority = account.2.codec.5.rtpmap = account.2.codec.6.enable = account.2.codec.6.payload_type = account.2.codec.6.priority = account.2.codec.6.rtpmap = account.2.codec.7.enable = account.2.codec.7.payload_type = account.2.codec.7.priority = account.2.codec.7.rtpmap = account.2.codec.8.enable = account.2.codec.8.payload_type = account.2.codec.8.priority = account.2.codec.8.rtpmap = account.2.codec.9.enable = account.2.codec.9.payload_type = account.2.codec.9.priority = account.2.codec.9.rtpmap = account.2.codec.10.enable = account.2.codec.10.payload_type = account.2.codec.10.priority = account.2.codec.10.rtpmap = account.2.codec.11.enable = account.2.codec.11.payload_type = account.2.codec.11.priority = account.2.codec.11.rtpmap = ####################################################################################### ## Audio Advanced ## ####################################################################################### account.2.srtp_encryption = account.2.ptime = ## The default value is 0(Take a SRTP all encryption).1:Only carry AES - 80 secret key,2: Only carry AES - 32 secret key ####################################################################################### ## Anonymous Call ## ####################################################################################### account.2.send_anonymous_code = account.2.anonymous_call = account.2.anonymous_call_oncode = account.2.anonymous_call_offcode = account.2.reject_anonymous_call = account.2.anonymous_reject_oncode = account.2.anonymous_reject_offcode = account.2.send_anonymous_rejection_code = ####################################################################################### ## Pickup Code ## ####################################################################################### account.2.dialoginfo_callpickup = account.2.group_pickup_code = account.2.direct_pickup_code = ####################################################################################### ## DTMF ## ####################################################################################### account.2.dtmf.type = account.2.dtmf.info_type = account.2.dtmf.dtmf_payload = ####################################################################################### ## Alert info ## ####################################################################################### account.2.alert_info_url_enable = account.2.ringtone.ring_type = ###Only for T46G Model account.2.picture_info_enable = ##Except T19P/T21P Models ##The default value is blank.Values range 256 characters in length account.2.alert_info = ####################################################################################### ## Conference ## ####################################################################################### account.2.conf_type = account.2.conf_uri = ####################################################################################### ## CID Source ## ####################################################################################### account.2.cid_source = account.2.cid_source_privacy = account.2.cid_source_ppi = account.2.cp_source = ####################################################################################### ## Session Timer ## ####################################################################################### account.2.session_timer.enable = account.2.session_timer.expires = account.2.session_timer.refresher = ####################################################################################### ## Music on Hold ## ####################################################################################### account.2.music_on_hold_type = account.2.music_server_uri = ####################################################################################### ## Advanced ## ####################################################################################### account.2.auto_answer = account.2.missed_calllog = account.2.100rel_enable = account.2.enable_user_equal_phone = account.2.compact_header_enable = account.2.custom_ua = ####################################################################################### ## DND(Except T19 Model) ## ####################################################################################### account.2.dnd.enable = account.2.dnd.on_code = account.2.dnd.off_code = ####################################################################################### ## Call Forward(Except T19 Model) ## ####################################################################################### account.2.always_fwd.enable = account.2.always_fwd.target = account.2.always_fwd.off_code = account.2.always_fwd.on_code = account.2.busy_fwd.enable = account.2.busy_fwd.target = account.2.busy_fwd.off_code = account.2.busy_fwd.on_code = account.2.timeout_fwd.enable = account.2.timeout_fwd.target = account.2.timeout_fwd.timeout = account.2.timeout_fwd.off_code = account.2.timeout_fwd.on_code = ####################################################################################### ## Voice Monitoring (Except T19P/T21P Models) ## ####################################################################################### account.2.vq_rtcpxr.collector_name= account.2.vq_rtcpxr.collector_server_host= account.2.vq_rtcpxr.collector_server_port= ####################################################################################### ## Broadsoft Hoteling ## ####################################################################################### account.2.hoteling.enable = account.2.hoteling.user_id = account.2.hoteling.password = account.2.hoteling.auto_login_enable = ####################################################################################### ## Broadsoft ACD ## ####################################################################################### account.2.acd.enable = account.2.acd.unavailable_reason_enable = account.2.acd.available = account.2.acd.initial_state = ####################################################################################### ## Broadsoft ACD Call Center ## ####################################################################################### account.2.reason_code.1 = account.2.reason_code_name.1 = account.2.bw_disp_code.1 = account.2.bw_disp_code_name.1 = account.2.supervisor_info_code.1 = account.2.supervisor_info_code_name.1 = ####################################################################################### ## Broadsoft Call Center ## ####################################################################################### account.2.call_center.call_info_enable = account.2.call_center.show_call_info_time = account.2.call_center.disp_code_enable = account.2.call_center.trace_enable = account.2.call_center.emergency_enable = account.2.call_center.queue_status_enable = account.2.call_center.queue_status_light_enable = ####################################################################################### ## Broadsoft XSI ## ####################################################################################### ##It configures the user name for XSI authentication for account X.Example:account.1.xsi.user = 3502@as.iop1.broadworks.net. ##The default value is blank. account.2.xsi.user = ##It configures the password for XSI authentication for account X.Example:account.1.xsi.password = 123456. ##The default value is blank. account.2.xsi.password = ##It configures the access URL of the Xtended Services Platform server for account X.Example:account.1.xsi.host = xsp1.iop1.broadworks.net. ##The default value is blank. account.2.xsi.host = ##It configures the server type of the Xtended Services Platform server for account X.Example:account.1.xsi.server_type = http. ##The default value is http. account.2.xsi.server_type = ##It configures the server port of the Xtended Services Platform server for account X.Example:account.1.xsi.port = 80. ##The default value is 80.Integer from 1 to 65535 account.2.xsi.port = ####################################################################################### ## Account3 Basic Settings ## ####################################################################################### account.3.enable = account.3.label = account.3.display_name = account.3.auth_name = account.3.user_name = account.3.password = account.3.outbound_proxy_enable = account.3.outbound_host = account.3.outbound_port = account.3.dial_tone = account.3.sip_server.1.transport_type = account.3.sip_server.2.transport_type = ####################################################################################### ## Failback ## ####################################################################################### account.3.naptr_build = account.3.fallback.redundancy_type = account.3.fallback.timeout = account.3.sip_server.1.address = account.3.sip_server.1.port = account.3.sip_server.1.expires = account.3.sip_server.1.retry_counts = account.3.sip_server.1.failback_mode = account.3.sip_server.1.failback_timeout = account.3.sip_server.1.register_on_enable = account.3.sip_server.2.address = account.3.sip_server.2.port = account.3.sip_server.2.expires = account.3.sip_server.2.retry_counts = account.3.sip_server.2.failback_mode = account.3.sip_server.2.failback_timeout = account.3.sip_server.2.register_on_enable = account.3.dns_cache_type = account.3.static_cache_pri = account.3.register_expires_overlap = account.3.subscribe_expires_overlap = ####################################################################################### ## Register Advanced ## ####################################################################################### account.3.sip_server_type = account.3.unregister_on_reboot = account.3.proxy_require = account.3.srv_ttl_timer_enable = account.3.register_mac = account.3.register_line = account.3.reg_fail_retry_interval = ######################################################################### ## NAT Settings ## ######################################################################### account.3.nat.nat_traversal = account.3.nat.udp_update_enable = account.3.nat.udp_update_time = account.3.nat.rport = ####################################################################################### ## Account3 Advance Settings ## ####################################################################################### voice_mail.number.3 = ##Except T19P/T21P Models account.3.auto_dial_enable = account.3.auto_dial_num = account.3.call_id_mode = account.3.call_info = ####################################################################################### ## Subscribe ## ####################################################################################### account.3.subscribe_mwi = account.3.subscribe_mwi_expires = account.3.subscribe_mwi_to_vm = account.3.subscribe_acd_expires= ##Except T19P/T21P Models account.3.display_mwi.enable = ##It is configuration MWI is NOTIFY messages, whether in Terminated status attributes. ##The default value is 0(Don't handle terminated values) account.3.mwi_parse_terminated = ####################################################################################### ## BLF List(Except T19D Model) ## ####################################################################################### account.3.blf.blf_list_uri = account.3.blf_list_code = account.3.blf_list_barge_in_code = account.3.blf.subscribe_period = account.3.blf.subscribe_event = account.3.out_dialog_blf_enable = account.3.blf.match_host.enable= ####################################################################################### ## BLA/SCA ## ####################################################################################### account.3.shared_line = account.3.bla_number = account.3.bla_subscribe_period = ##It configures the Call Pull Feature access code for account X. ##The default value is blank. account.3.shared_line_callpull_code = ##It configures number of linekey for line. ##The default value is 1. account.3.number_of_linekey = ####################################################################################### ## Brosoft Callpark ## ####################################################################################### ##It enables or disables Broadsoft Callpark for account X.0-Disabled,1-Broadsoft SCA. ##The default value is 0. account.3.callpark_enable = ####################################################################################### ## Audio Codec ## ####################################################################################### ###T19D/T21D support codec1~codec8 ###T20P/T22P/T26P/T28P/T41P/T42G/T46G support codec1~codec11 account.3.codec.1.enable = account.3.codec.1.payload_type = account.3.codec.1.priority = account.3.codec.1.rtpmap = account.3.codec.2.enable = account.3.codec.2.payload_type = account.3.codec.2.priority = account.3.codec.2.rtpmap = account.3.codec.3.enable = account.3.codec.3.payload_type = account.3.codec.3.priority = account.3.codec.3.rtpmap = account.3.codec.4.enable = account.3.codec.4.payload_type = account.3.codec.4.priority = account.3.codec.4.rtpmap = account.3.codec.5.enable = account.3.codec.5.payload_type = account.3.codec.5.priority = account.3.codec.5.rtpmap = account.3.codec.6.enable = account.3.codec.6.payload_type = account.3.codec.6.priority = account.3.codec.6.rtpmap = account.3.codec.7.enable = account.3.codec.7.payload_type = account.3.codec.7.priority = account.3.codec.7.rtpmap = account.3.codec.8.enable = account.3.codec.8.payload_type = account.3.codec.8.priority = account.3.codec.8.rtpmap = account.3.codec.9.enable = account.3.codec.9.payload_type = account.3.codec.9.priority = account.3.codec.9.rtpmap = account.3.codec.10.enable = account.3.codec.10.payload_type = account.3.codec.10.priority = account.3.codec.10.rtpmap = account.3.codec.11.enable = account.3.codec.11.payload_type = account.3.codec.11.priority = account.3.codec.11.rtpmap = ####################################################################################### ## Audio Advanced ## ####################################################################################### account.3.srtp_encryption = account.3.ptime = ## The default value is 0(Take a SRTP all encryption).1:Only carry AES - 80 secret key,2: Only carry AES - 32 secret key ####################################################################################### ## Anonymous Call ## ####################################################################################### account.3.send_anonymous_code = account.3.anonymous_call = account.3.anonymous_call_oncode = account.3.anonymous_call_offcode = account.3.reject_anonymous_call = account.3.anonymous_reject_oncode = account.3.anonymous_reject_offcode = account.3.send_anonymous_rejection_code = ####################################################################################### ## Pickup Code ## ####################################################################################### account.3.dialoginfo_callpickup = account.3.group_pickup_code = account.3.direct_pickup_code = ####################################################################################### ## DTMF ## ####################################################################################### account.3.dtmf.type = account.3.dtmf.info_type = account.3.dtmf.dtmf_payload = ####################################################################################### ## Alert info ## ####################################################################################### account.3.alert_info_url_enable = account.3.ringtone.ring_type = ###Only for T46G Model account.3.picture_info_enable = ##Except T19P/T21P Models ##The default value is blank.Values range 256 characters in length account.3.alert_info = ####################################################################################### ## Conference ## ####################################################################################### account.3.conf_type = account.3.conf_uri = ####################################################################################### ## CID Source ## ####################################################################################### account.3.cid_source = account.3.cid_source_privacy = account.3.cid_source_ppi = account.3.cp_source = ####################################################################################### ## Session Timer ## ####################################################################################### account.3.session_timer.enable = account.3.session_timer.expires = account.3.session_timer.refresher = ####################################################################################### ## Music on Hold ## ####################################################################################### account.3.music_on_hold_type = account.3.music_server_uri = ####################################################################################### ## Advanced ## ####################################################################################### account.3.auto_answer = account.3.missed_calllog = account.3.100rel_enable = account.3.enable_user_equal_phone = account.3.compact_header_enable = account.3.custom_ua = ####################################################################################### ## DND(Except T19 Model) ## ####################################################################################### account.3.dnd.enable = account.3.dnd.on_code = account.3.dnd.off_code = ####################################################################################### ## Call Forward(Except T19 Model) ## ####################################################################################### account.3.always_fwd.enable = account.3.always_fwd.target = account.3.always_fwd.off_code = account.3.always_fwd.on_code = account.3.busy_fwd.enable = account.3.busy_fwd.target = account.3.busy_fwd.off_code = account.3.busy_fwd.on_code = account.3.timeout_fwd.enable = account.3.timeout_fwd.target = account.3.timeout_fwd.timeout = account.3.timeout_fwd.off_code = account.3.timeout_fwd.on_code = ####################################################################################### ## Voice Monitoring (Except T19P/T21P Models) ## ####################################################################################### account.3.vq_rtcpxr.collector_name= account.3.vq_rtcpxr.collector_server_host= account.3.vq_rtcpxr.collector_server_port= ####################################################################################### ## Broadsoft Hoteling ## ####################################################################################### account.3.hoteling.enable = account.3.hoteling.user_id = account.3.hoteling.password = account.3.hoteling.auto_login_enable = ####################################################################################### ## Broadsoft ACD ## ####################################################################################### account.3.acd.enable = account.3.acd.unavailable_reason_enable = account.3.acd.available = account.3.acd.initial_state = ####################################################################################### ## Broadsoft ACD Call Center ## ####################################################################################### account.3.reason_code.1 = account.3.reason_code_name.1 = account.3.bw_disp_code.1 = account.3.bw_disp_code_name.1 = account.3.supervisor_info_code.1 = account.3.supervisor_info_code_name.1 = ####################################################################################### ## Broadsoft Call Center ## ####################################################################################### account.3.call_center.call_info_enable = account.3.call_center.show_call_info_time = account.3.call_center.disp_code_enable = account.3.call_center.trace_enable = account.3.call_center.emergency_enable = account.3.call_center.queue_status_enable = account.3.call_center.queue_status_light_enable = ####################################################################################### ## Broadsoft XSI ## ####################################################################################### ##It configures the user name for XSI authentication for account X.Example:account.1.xsi.user = 3502@as.iop1.broadworks.net. ##The default value is blank. account.3.xsi.user = ##It configures the password for XSI authentication for account X.Example:account.1.xsi.password = 123456. ##The default value is blank. account.3.xsi.password = ##It configures the access URL of the Xtended Services Platform server for account X.Example:account.1.xsi.host = xsp1.iop1.broadworks.net. ##The default value is blank. account.3.xsi.host = ##It configures the server type of the Xtended Services Platform server for account X.Example:account.1.xsi.server_type = http. ##The default value is http. account.3.xsi.server_type = ##It configures the server port of the Xtended Services Platform server for account X.Example:account.1.xsi.port = 80. ##The default value is 80.Integer from 1 to 65535 account.3.xsi.port = ####################################################################################### ## Account4 Basic Settings ## ####################################################################################### account.4.enable = account.4.label = account.4.display_name = account.4.auth_name = account.4.user_name = account.4.password = account.4.outbound_proxy_enable = account.4.outbound_host = account.4.outbound_port = account.4.dial_tone = account.4.sip_server.1.transport_type = account.4.sip_server.2.transport_type = ####################################################################################### ## Failback ## ####################################################################################### account.4.naptr_build = account.4.fallback.redundancy_type = account.4.fallback.timeout = account.4.sip_server.1.address = account.4.sip_server.1.port = account.4.sip_server.1.expires = account.4.sip_server.1.retry_counts = account.4.sip_server.1.failback_mode = account.4.sip_server.1.failback_timeout = account.4.sip_server.1.register_on_enable = account.4.sip_server.2.address = account.4.sip_server.2.port = account.4.sip_server.2.expires = account.4.sip_server.2.retry_counts = account.4.sip_server.2.failback_mode = account.4.sip_server.2.failback_timeout = account.4.sip_server.2.register_on_enable = account.4.dns_cache_type = account.4.static_cache_pri = account.4.register_expires_overlap = account.4.subscribe_expires_overlap = ####################################################################################### ## Register Advanced ## ####################################################################################### account.4.sip_server_type = account.4.unregister_on_reboot = account.4.proxy_require = account.4.srv_ttl_timer_enable = account.4.register_mac = account.4.register_line = account.4.reg_fail_retry_interval = ######################################################################### ## NAT Settings ## ######################################################################### account.4.nat.nat_traversal = account.4.nat.udp_update_enable = account.4.nat.udp_update_time = account.4.nat.rport = ##V80 do not support(T23/T27/T61/T66/T29/T46)## account.4.nat.stun_server = account.4.nat.stun_port = ####################################################################################### ## Account4 Advance Settings ## ####################################################################################### voice_mail.number.4 = ##Except T19P/T21P Models account.4.auto_dial_enable = account.4.auto_dial_num = account.4.call_id_mode = account.4.call_info = ####################################################################################### ## Subscribe ## ####################################################################################### account.4.subscribe_mwi = account.4.subscribe_mwi_expires = account.4.subscribe_mwi_to_vm = account.4.subscribe_acd_expires= ##Except T19P/T21P Models account.4.display_mwi.enable = ##It is configuration MWI is NOTIFY messages, whether in Terminated status attributes. ##The default value is 0(Don't handle terminated values) account.4.mwi_parse_terminated = ####################################################################################### ## BLF List(Except T19D Model) ## ####################################################################################### account.4.blf.blf_list_uri = account.4.blf_list_code = account.4.blf_list_barge_in_code = account.4.blf.subscribe_period = account.4.blf.subscribe_event = account.4.out_dialog_blf_enable = account.4.blf.match_host.enable= ####################################################################################### ## BLA/SCA ## ####################################################################################### account.4.shared_line = account.4.bla_number = account.4.bla_subscribe_period = ##It configures the Call Pull Feature access code for account X. ##The default value is blank. account.4.shared_line_callpull_code = ##It configures number of linekey for line. ##The default value is 1. account.4.number_of_linekey = ####################################################################################### ## Brosoft Callpark ## ####################################################################################### ##It enables or disables Broadsoft Callpark for account X.0-Disabled,1-Broadsoft SCA. ##The default value is 0. account.4.callpark_enable = ####################################################################################### ## Audio Codec ## ####################################################################################### ###T19D/T21D support codec1~codec8 ###T20P/T22P/T26P/T28P/T41P/T42G/T46G support codec1~codec11 account.4.codec.1.enable = account.4.codec.1.payload_type = account.4.codec.1.priority = account.4.codec.1.rtpmap = account.4.codec.2.enable = account.4.codec.2.payload_type = account.4.codec.2.priority = account.4.codec.2.rtpmap = account.4.codec.3.enable = account.4.codec.3.payload_type = account.4.codec.3.priority = account.4.codec.3.rtpmap = account.4.codec.4.enable = account.4.codec.4.payload_type = account.4.codec.4.priority = account.4.codec.4.rtpmap = account.4.codec.5.enable = account.4.codec.5.payload_type = account.4.codec.5.priority = account.4.codec.5.rtpmap = account.4.codec.6.enable = account.4.codec.6.payload_type = account.4.codec.6.priority = account.4.codec.6.rtpmap = account.4.codec.7.enable = account.4.codec.7.payload_type = account.4.codec.7.priority = account.4.codec.7.rtpmap = account.4.codec.8.enable = account.4.codec.8.payload_type = account.4.codec.8.priority = account.4.codec.8.rtpmap = account.4.codec.9.enable = account.4.codec.9.payload_type = account.4.codec.9.priority = account.4.codec.9.rtpmap = account.4.codec.10.enable = account.4.codec.10.payload_type = account.4.codec.10.priority = account.4.codec.10.rtpmap = account.4.codec.11.enable = account.4.codec.11.payload_type = account.4.codec.11.priority = account.4.codec.11.rtpmap = ####################################################################################### ## Audio Advanced ## ####################################################################################### account.4.srtp_encryption = account.4.ptime = ## The default value is 0(Take a SRTP all encryption).1:Only carry AES - 80 secret key,2: Only carry AES - 32 secret key ####################################################################################### ## Anonymous Call ## ####################################################################################### account.4.send_anonymous_code = account.4.anonymous_call = account.4.anonymous_call_oncode = account.4.anonymous_call_offcode = account.4.reject_anonymous_call = account.4.anonymous_reject_oncode = account.4.anonymous_reject_offcode = account.4.send_anonymous_rejection_code = ####################################################################################### ## Pickup Code ## ####################################################################################### account.4.dialoginfo_callpickup = account.4.group_pickup_code = account.4.direct_pickup_code = ####################################################################################### ## DTMF ## ####################################################################################### account.4.dtmf.type = account.4.dtmf.info_type = account.4.dtmf.dtmf_payload = ####################################################################################### ## Alert info ## ####################################################################################### account.4.alert_info_url_enable = account.4.ringtone.ring_type = ###Only for T46G Model account.4.picture_info_enable = ##Except T19P/T21P Models ##The default value is blank.Values range 256 characters in length account.4.alert_info = ####################################################################################### ## Conference ## ####################################################################################### account.4.conf_type = account.4.conf_uri = ####################################################################################### ## CID Source ## ####################################################################################### account.4.cid_source = account.4.cid_source_privacy = account.4.cid_source_ppi = account.4.cp_source = ####################################################################################### ## Session Timer ## ####################################################################################### account.4.session_timer.enable = account.4.session_timer.expires = account.4.session_timer.refresher = ####################################################################################### ## Music on Hold ## ####################################################################################### account.4.music_on_hold_type = account.4.music_server_uri = ####################################################################################### ## Advanced ## ####################################################################################### account.4.auto_answer = account.4.missed_calllog = account.4.100rel_enable = account.4.enable_user_equal_phone = account.4.compact_header_enable = account.4.custom_ua = ####################################################################################### ## DND(Except T19 Model) ## ####################################################################################### account.4.dnd.enable = account.4.dnd.on_code = account.4.dnd.off_code = ####################################################################################### ## Call Forward(Except T19 Model) ## ####################################################################################### account.4.always_fwd.enable = account.4.always_fwd.target = account.4.always_fwd.off_code = account.4.always_fwd.on_code = account.4.busy_fwd.enable = account.4.busy_fwd.target = account.4.busy_fwd.off_code = account.4.busy_fwd.on_code = account.4.timeout_fwd.enable = account.4.timeout_fwd.target = account.4.timeout_fwd.timeout = account.4.timeout_fwd.off_code = account.4.timeout_fwd.on_code = ####################################################################################### ## Voice Monitoring (Except T19P/T21P Models) ## ####################################################################################### account.4.vq_rtcpxr.collector_name= account.4.vq_rtcpxr.collector_server_host= account.4.vq_rtcpxr.collector_server_port= ####################################################################################### ## Broadsoft Hoteling ## ####################################################################################### account.4.hoteling.enable = account.4.hoteling.user_id = account.4.hoteling.password = account.4.hoteling.auto_login_enable = ####################################################################################### ## Broadsoft ACD ## ####################################################################################### account.4.acd.enable = account.4.acd.unavailable_reason_enable = account.4.acd.available = account.4.acd.initial_state = ####################################################################################### ## Broadsoft ACD Call Center ## ####################################################################################### account.4.reason_code.1 = account.4.reason_code_name.1 = account.4.bw_disp_code.1 = account.4.bw_disp_code_name.1 = account.4.supervisor_info_code.1 = account.4.supervisor_info_code_name.1 = ####################################################################################### ## Broadsoft Call Center ## ####################################################################################### account.4.call_center.call_info_enable = account.4.call_center.show_call_info_time = account.4.call_center.disp_code_enable = account.4.call_center.trace_enable = account.4.call_center.emergency_enable = account.4.call_center.queue_status_enable = account.4.call_center.queue_status_light_enable = ####################################################################################### ## Broadsoft XSI ## ####################################################################################### ##It configures the user name for XSI authentication for account X.Example:account.1.xsi.user = 3502@as.iop1.broadworks.net. ##The default value is blank. account.4.xsi.user = ##It configures the password for XSI authentication for account X.Example:account.1.xsi.password = 123456. ##The default value is blank. account.4.xsi.password = ##It configures the access URL of the Xtended Services Platform server for account X.Example:account.1.xsi.host = xsp1.iop1.broadworks.net. ##The default value is blank. account.4.xsi.host = ##It configures the server type of the Xtended Services Platform server for account X.Example:account.1.xsi.server_type = http. ##The default value is http. account.4.xsi.server_type = ##It configures the server port of the Xtended Services Platform server for account X.Example:account.1.xsi.port = 80. ##The default value is 80.Integer from 1 to 65535 account.4.xsi.port = ####################################################################################### ## Account5 Basic Settings ## ####################################################################################### account.5.enable = account.5.label = account.5.display_name = account.5.auth_name = account.5.user_name = account.5.password = account.5.outbound_proxy_enable = account.5.outbound_host = account.5.outbound_port = account.5.dial_tone = account.5.sip_server.1.transport_type = account.5.sip_server.2.transport_type = ####################################################################################### ## Failback ## ####################################################################################### account.5.naptr_build = account.5.fallback.redundancy_type = account.5.fallback.timeout = account.5.sip_server.1.address = account.5.sip_server.1.port = account.5.sip_server.1.expires = account.5.sip_server.1.retry_counts = account.5.sip_server.1.failback_mode = account.5.sip_server.1.failback_timeout = account.5.sip_server.1.register_on_enable = account.5.sip_server.2.address = account.5.sip_server.2.port = account.5.sip_server.2.expires = account.5.sip_server.2.retry_counts = account.5.sip_server.2.failback_mode = account.5.sip_server.2.failback_timeout = account.5.sip_server.2.register_on_enable = account.5.dns_cache_type = account.5.static_cache_pri = account.5.register_expires_overlap = account.5.subscribe_expires_overlap = ####################################################################################### ## Register Advanced ## ####################################################################################### account.5.sip_server_type = account.5.unregister_on_reboot = account.5.proxy_require = account.5.srv_ttl_timer_enable = account.5.register_mac = account.5.register_line = account.5.reg_fail_retry_interval = ######################################################################### ## NAT Settings ## ######################################################################### account.5.nat.nat_traversal = account.5.nat.udp_update_enable = account.5.nat.udp_update_time = account.5.nat.rport = ####################################################################################### ## Account5 Advance Settings ## ####################################################################################### voice_mail.number.5 = ##Except T19P/T21P Models account.5.auto_dial_enable = account.5.auto_dial_num = account.5.call_id_mode = account.5.call_info = ####################################################################################### ## Subscribe ## ####################################################################################### account.5.subscribe_mwi = account.5.subscribe_mwi_expires = account.5.subscribe_mwi_to_vm = account.5.subscribe_acd_expires= ##Except T19P/T21P Models account.5.display_mwi.enable = ##It is configuration MWI is NOTIFY messages, whether in Terminated status attributes. ##The default value is 0(Don't handle terminated values) account.5.mwi_parse_terminated = ####################################################################################### ## BLF List(Except T19D Model) ## ####################################################################################### account.5.blf.blf_list_uri = account.5.blf_list_code = account.5.blf_list_barge_in_code = account.5.blf.subscribe_period = account.5.blf.subscribe_event = account.5.out_dialog_blf_enable = account.5.blf.match_host.enable= ####################################################################################### ## BLA/SCA ## ####################################################################################### account.5.shared_line = account.5.bla_number = account.5.bla_subscribe_period = ##It configures the Call Pull Feature access code for account X. ##The default value is blank. account.5.shared_line_callpull_code = ##It configures number of linekey for line. ##The default value is 1. account.5.number_of_linekey = ####################################################################################### ## Brosoft Callpark ## ####################################################################################### ##It enables or disables Broadsoft Callpark for account X.0-Disabled,1-Broadsoft SCA. ##The default value is 0. account.5.callpark_enable = ####################################################################################### ## Audio Codec ## ####################################################################################### ###T19D/T21D support codec1~codec8 ###T20P/T22P/T26P/T28P/T41P/T42G/T46G support codec1~codec11 account.5.codec.1.enable = account.5.codec.1.payload_type = account.5.codec.1.priority = account.5.codec.1.rtpmap = account.5.codec.2.enable = account.5.codec.2.payload_type = account.5.codec.2.priority = account.5.codec.2.rtpmap = account.5.codec.3.enable = account.5.codec.3.payload_type = account.5.codec.3.priority = account.5.codec.3.rtpmap = account.5.codec.4.enable = account.5.codec.4.payload_type = account.5.codec.4.priority = account.5.codec.4.rtpmap = account.5.codec.5.enable = account.5.codec.5.payload_type = account.5.codec.5.priority = account.5.codec.5.rtpmap = account.5.codec.6.enable = account.5.codec.6.payload_type = account.5.codec.6.priority = account.5.codec.6.rtpmap = account.5.codec.7.enable = account.5.codec.7.payload_type = account.5.codec.7.priority = account.5.codec.7.rtpmap = account.5.codec.8.enable = account.5.codec.8.payload_type = account.5.codec.8.priority = account.5.codec.8.rtpmap = account.5.codec.9.enable = account.5.codec.9.payload_type = account.5.codec.9.priority = account.5.codec.9.rtpmap = account.5.codec.10.enable = account.5.codec.10.payload_type = account.5.codec.10.priority = account.5.codec.10.rtpmap = account.5.codec.11.enable = account.5.codec.11.payload_type = account.5.codec.11.priority = account.5.codec.11.rtpmap = ####################################################################################### ## Audio Advanced ## ####################################################################################### account.5.srtp_encryption = account.5.ptime = ## The default value is 0(Take a SRTP all encryption).1:Only carry AES - 80 secret key,2: Only carry AES - 32 secret key ####################################################################################### ## Anonymous Call ## ####################################################################################### account.5.send_anonymous_code = account.5.anonymous_call = account.5.anonymous_call_oncode = account.5.anonymous_call_offcode = account.5.reject_anonymous_call = account.5.anonymous_reject_oncode = account.5.anonymous_reject_offcode = account.5.send_anonymous_rejection_code = ####################################################################################### ## Pickup Code ## ####################################################################################### account.5.dialoginfo_callpickup = account.5.group_pickup_code = account.5.direct_pickup_code = ####################################################################################### ## DTMF ## ####################################################################################### account.5.dtmf.type = account.5.dtmf.info_type = account.5.dtmf.dtmf_payload = ####################################################################################### ## Alert info ## ####################################################################################### account.5.alert_info_url_enable = account.5.ringtone.ring_type = ###Only for T46G Model account.5.picture_info_enable = ##Except T19P/T21P Models ##The default value is blank.Values range 256 characters in length account.5.alert_info = ####################################################################################### ## Conference ## ####################################################################################### account.5.conf_type = account.5.conf_uri = ####################################################################################### ## CID Source ## ####################################################################################### account.5.cid_source = account.5.cid_source_privacy = account.5.cid_source_ppi = account.5.cp_source = ####################################################################################### ## Session Timer ## ####################################################################################### account.5.session_timer.enable = account.5.session_timer.expires = account.5.session_timer.refresher = ####################################################################################### ## Music on Hold ## ####################################################################################### account.5.music_on_hold_type = account.5.music_server_uri = ####################################################################################### ## Advanced ## ####################################################################################### account.5.auto_answer = account.5.missed_calllog = account.5.100rel_enable = account.5.enable_user_equal_phone = account.5.compact_header_enable = account.5.custom_ua = ####################################################################################### ## DND(Except T19 Model) ## ####################################################################################### account.5.dnd.enable = account.5.dnd.on_code = account.5.dnd.off_code = ####################################################################################### ## Call Forward(Except T19 Model) ## ####################################################################################### account.5.always_fwd.enable = account.5.always_fwd.target = account.5.always_fwd.off_code = account.5.always_fwd.on_code = account.5.busy_fwd.enable = account.5.busy_fwd.target = account.5.busy_fwd.off_code = account.5.busy_fwd.on_code = account.5.timeout_fwd.enable = account.5.timeout_fwd.target = account.5.timeout_fwd.timeout = account.5.timeout_fwd.off_code = account.5.timeout_fwd.on_code = ####################################################################################### ## Voice Monitoring (Except T19P/T21P Models) ## ####################################################################################### account.5.vq_rtcpxr.collector_name= account.5.vq_rtcpxr.collector_server_host= account.5.vq_rtcpxr.collector_server_port= ####################################################################################### ## Broadsoft Hoteling ## ####################################################################################### account.5.hoteling.enable = account.5.hoteling.user_id = account.5.hoteling.password = account.5.hoteling.auto_login_enable = ####################################################################################### ## Broadsoft ACD ## ####################################################################################### account.5.acd.enable = account.5.acd.unavailable_reason_enable = account.5.acd.available = account.5.acd.initial_state = ####################################################################################### ## Broadsoft ACD Call Center ## ####################################################################################### account.5.reason_code.1 = account.5.reason_code_name.1 = account.5.bw_disp_code.1 = account.5.bw_disp_code_name.1 = account.5.supervisor_info_code.1 = account.5.supervisor_info_code_name.1 = ####################################################################################### ## Broadsoft Call Center ## ####################################################################################### account.5.call_center.call_info_enable = account.5.call_center.show_call_info_time = account.5.call_center.disp_code_enable = account.5.call_center.trace_enable = account.5.call_center.emergency_enable = account.5.call_center.queue_status_enable = account.5.call_center.queue_status_light_enable = ####################################################################################### ## Broadsoft XSI ## ####################################################################################### ##It configures the user name for XSI authentication for account X.Example:account.1.xsi.user = 3502@as.iop1.broadworks.net. ##The default value is blank. account.5.xsi.user = ##It configures the password for XSI authentication for account X.Example:account.1.xsi.password = 123456. ##The default value is blank. account.5.xsi.password = ##It configures the access URL of the Xtended Services Platform server for account X.Example:account.1.xsi.host = xsp1.iop1.broadworks.net. ##The default value is blank. account.5.xsi.host = ##It configures the server type of the Xtended Services Platform server for account X.Example:account.1.xsi.server_type = http. ##The default value is http. account.5.xsi.server_type = ##It configures the server port of the Xtended Services Platform server for account X.Example:account.1.xsi.port = 80. ##The default value is 80.Integer from 1 to 65535 account.5.xsi.port = ####################################################################################### ## Account6 Basic Settings ## ####################################################################################### account.6.enable = account.6.label = account.6.display_name = account.6.auth_name = account.6.user_name = account.6.password = account.6.outbound_proxy_enable = account.6.outbound_host = account.6.outbound_port = account.6.dial_tone = account.6.sip_server.1.transport_type = account.6.sip_server.2.transport_type = ####################################################################################### ## Failback ## ####################################################################################### account.6.naptr_build = account.6.fallback.redundancy_type = account.6.fallback.timeout = account.6.sip_server.1.address = account.6.sip_server.1.port = account.6.sip_server.1.expires = account.6.sip_server.1.retry_counts = account.6.sip_server.1.failback_mode = account.6.sip_server.1.failback_timeout = account.6.sip_server.1.register_on_enable = account.6.sip_server.2.address = account.6.sip_server.2.port = account.6.sip_server.2.expires = account.6.sip_server.2.retry_counts = account.6.sip_server.2.failback_mode = account.6.sip_server.2.failback_timeout = account.6.sip_server.2.register_on_enable = account.6.dns_cache_type = account.6.static_cache_pri = account.6.register_expires_overlap = account.6.subscribe_expires_overlap = ####################################################################################### ## Register Advanced ## ####################################################################################### account.6.sip_server_type = account.6.unregister_on_reboot = account.6.proxy_require = account.6.srv_ttl_timer_enable = account.6.register_mac = account.6.register_line = account.6.reg_fail_retry_interval = ######################################################################### ## NAT Settings ## ######################################################################### account.6.nat.nat_traversal = account.6.nat.udp_update_enable = account.6.nat.udp_update_time = account.6.nat.rport = ####################################################################################### ## Account6 Advance Settings ## ####################################################################################### voice_mail.number.6 = ##Except T19P/T21P Models account.6.auto_dial_enable = account.6.auto_dial_num = account.6.call_id_mode = account.6.call_info = ####################################################################################### ## Subscribe ## ####################################################################################### account.6.subscribe_mwi = account.6.subscribe_mwi_expires = account.6.subscribe_mwi_to_vm = account.6.subscribe_acd_expires= ##Except T19P/T21P Models account.6.display_mwi.enable = ##It is configuration MWI is NOTIFY messages, whether in Terminated status attributes. ##The default value is 0(Don't handle terminated values) account.6.mwi_parse_terminated = ####################################################################################### ## BLF List(Except T19D Model) ## ####################################################################################### account.6.blf.blf_list_uri = account.6.blf_list_code = account.6.blf_list_barge_in_code = account.6.blf.subscribe_period = account.6.blf.subscribe_event = account.6.out_dialog_blf_enable = account.6.blf.match_host.enable= ####################################################################################### ## BLA/SCA ## ####################################################################################### account.6.shared_line = account.6.bla_number = account.6.bla_subscribe_period = ##It configures the Call Pull Feature access code for account X. ##The default value is blank. account.6.shared_line_callpull_code = ##It configures number of linekey for line. ##The default value is 1. account.6.number_of_linekey = ####################################################################################### ## Brosoft Callpark ## ####################################################################################### ##It enables or disables Broadsoft Callpark for account X.0-Disabled,1-Broadsoft SCA. ##The default value is 0. account.6.callpark_enable = ####################################################################################### ## Audio Codec ## ####################################################################################### ###T19D/T21D support codec1~codec8 ###T20P/T22P/T26P/T28P/T41P/T42G/T46G support codec1~codec11 account.6.codec.1.enable = account.6.codec.1.payload_type = account.6.codec.1.priority = account.6.codec.1.rtpmap = account.6.codec.2.enable = account.6.codec.2.payload_type = account.6.codec.2.priority = account.6.codec.2.rtpmap = account.6.codec.3.enable = account.6.codec.3.payload_type = account.6.codec.3.priority = account.6.codec.3.rtpmap = account.6.codec.4.enable = account.6.codec.4.payload_type = account.6.codec.4.priority = account.6.codec.4.rtpmap = account.6.codec.5.enable = account.6.codec.5.payload_type = account.6.codec.5.priority = account.6.codec.5.rtpmap = account.6.codec.6.enable = account.6.codec.6.payload_type = account.6.codec.6.priority = account.6.codec.6.rtpmap = account.6.codec.7.enable = account.6.codec.7.payload_type = account.6.codec.7.priority = account.6.codec.7.rtpmap = account.6.codec.8.enable = account.6.codec.8.payload_type = account.6.codec.8.priority = account.6.codec.8.rtpmap = account.6.codec.9.enable = account.6.codec.9.payload_type = account.6.codec.9.priority = account.6.codec.9.rtpmap = account.6.codec.10.enable = account.6.codec.10.payload_type = account.6.codec.10.priority = account.6.codec.10.rtpmap = account.6.codec.11.enable = account.6.codec.11.payload_type = account.6.codec.11.priority = account.6.codec.11.rtpmap = ####################################################################################### ## Audio Advanced ## ####################################################################################### account.6.srtp_encryption = account.6.ptime = ## The default value is 0(Take a SRTP all encryption).1:Only carry AES - 80 secret key,2: Only carry AES - 32 secret key ####################################################################################### ## Anonymous Call ## ####################################################################################### account.6.send_anonymous_code = account.6.anonymous_call = account.6.anonymous_call_oncode = account.6.anonymous_call_offcode = account.6.reject_anonymous_call = account.6.anonymous_reject_oncode = account.6.anonymous_reject_offcode = account.6.send_anonymous_rejection_code = ####################################################################################### ## Pickup Code ## ####################################################################################### account.6.dialoginfo_callpickup = account.6.group_pickup_code = account.6.direct_pickup_code = ####################################################################################### ## DTMF ## ####################################################################################### account.6.dtmf.type = account.6.dtmf.info_type = ###Only T46G Model supports this parameter account.6.dtmf.dtmf_payload = ####################################################################################### ## Alert info ## ####################################################################################### account.6.alert_info_url_enable = account.6.ringtone.ring_type = ###Only for T46G Model account.6.picture_info_enable = ##Except T19P/T21P Models ##The default value is blank.Values range 256 characters in length account.6.alert_info = ####################################################################################### ## Conference ## ####################################################################################### account.6.conf_type = account.6.conf_uri = ####################################################################################### ## CID Source ## ####################################################################################### account.6.cid_source = account.6.cid_source_privacy = account.6.cid_source_ppi = account.6.cp_source = ####################################################################################### ## Session Timer ## ####################################################################################### account.6.session_timer.enable = account.6.session_timer.expires = account.6.session_timer.refresher = ####################################################################################### ## Music on Hold ## ####################################################################################### account.6.music_on_hold_type = account.6.music_server_uri = ####################################################################################### ## Advanced ## ####################################################################################### account.6.auto_answer = account.6.missed_calllog = account.6.100rel_enable = account.6.enable_user_equal_phone = account.6.compact_header_enable = account.6.custom_ua = ####################################################################################### ## DND(Except T19 Model) ## ####################################################################################### account.6.dnd.enable = account.6.dnd.on_code = account.6.dnd.off_code = ####################################################################################### ## Call Forward(Except T19 Model) ## ####################################################################################### account.6.always_fwd.enable = account.6.always_fwd.target = account.6.always_fwd.off_code = account.6.always_fwd.on_code = account.6.busy_fwd.enable = account.6.busy_fwd.target = account.6.busy_fwd.off_code = account.6.busy_fwd.on_code = account.6.timeout_fwd.enable = account.6.timeout_fwd.target = account.6.timeout_fwd.timeout = account.6.timeout_fwd.off_code = account.6.timeout_fwd.on_code = ####################################################################################### ## Voice Monitoring (Except T19P/T21P Models) ## ####################################################################################### account.6.vq_rtcpxr.collector_name= account.6.vq_rtcpxr.collector_server_host= account.6.vq_rtcpxr.collector_server_port= ####################################################################################### ## Broadsoft Hoteling ## ####################################################################################### account.6.hoteling.enable = account.6.hoteling.user_id = account.6.hoteling.password = account.6.hoteling.auto_login_enable = ####################################################################################### ## Broadsoft ACD ## ####################################################################################### account.6.acd.enable = account.6.acd.unavailable_reason_enable = account.6.acd.available = account.6.acd.initial_state = ####################################################################################### ## Broadsoft ACD Call Center ## ####################################################################################### account.6.reason_code.1 = account.6.reason_code_name.1 = account.6.bw_disp_code.1 = account.6.bw_disp_code_name.1 = account.6.supervisor_info_code.1 = account.6.supervisor_info_code_name.1 = ####################################################################################### ## Broadsoft Call Center ## ####################################################################################### account.6.call_center.call_info_enable = account.6.call_center.show_call_info_time = account.6.call_center.disp_code_enable = account.6.call_center.trace_enable = account.6.call_center.emergency_enable = account.6.call_center.queue_status_enable = account.6.call_center.queue_status_light_enable = ####################################################################################### ## Broadsoft XSI ## ####################################################################################### ##It configures the user name for XSI authentication for account X.Example:account.1.xsi.user = 3502@as.iop1.broadworks.net. ##The default value is blank. account.6.xsi.user = ##It configures the password for XSI authentication for account X.Example:account.1.xsi.password = 123456. ##The default value is blank. account.6.xsi.password = ##It configures the access URL of the Xtended Services Platform server for account X.Example:account.1.xsi.host = xsp1.iop1.broadworks.net. ##The default value is blank. account.6.xsi.host = ##It configures the server type of the Xtended Services Platform server for account X.Example:account.1.xsi.server_type = http. ##The default value is http. account.6.xsi.server_type = ##It configures the server port of the Xtended Services Platform server for account X.Example:account.1.xsi.port = 80. ##The default value is 80.Integer from 1 to 65535 account.6.xsi.port = ####################################################################################### ## Broadsoft Setting ## ####################################################################################### bw.enable = ###It enables or disables feature key synchronization. ###0-Disabled,1-Enabled. ###The default value is 0. bw.feature_key_sync = ####################################################################################### ## Broadsoft Phonebook(Except T20P model) ## ####################################################################################### ###It enables or disables the phone to display the group directory. ###0-Disabled,1-Enabled. ###The default value is 1. bw_phonebook.group_enable = ###It enables or disables the phone to display the personal directory. ###0-Disabled,1-Enabled. ###The default value is 1. bw_phonebook.personal_enable = ###It enables or disables the phone to display the group common directory. ###0-Disabled,1-Enabled. ###The default value is 1. bw_phonebook.group_common_enable = ###It enables or disables the phone to display the enterprise directory. ###0-Disabled,1-Enabled. ###The default value is 1. bw_phonebook.enterprise_enable = ###It enables or disables the phone to display the enterprise common directory. ###0-Disabled,1-Enabled. ###The default value is 1. bw_phonebook.enterprise_common_enable = ###It configures the display name on the LCD screen for the enterprise common directory. ###The default value is EnterpriseCommon. bw_phonebook.enterprise_common_displayname = ###It enables or disables BroadSoft call log feature. ###0-Disabled,1-Enabled. ###The default value is 0. bw_phonebook.call_log_enable = ###It enables or disables custom directory feature. ###0-Disabled,1-Enabled. ###The default value is 0. bw_phonebook.custom = ###It configures the display name on the LCD screen for the group directory. ###The default value is Group. bw_phonebook.group_displayname = ###It configures the display name on the LCD screen for the enterprise directory. ###The default value is Enterprise. bw_phonebook.enterprise_displayname = ###It configures the display name on the LCD screen for the personal directory. ###The default value is Personal. bw_phonebook.personal_displayname = bw_phonebook.group_common_displayname = ##It configures the interval (in minutes) for the phone to update the data of the BroadSoft directory from the BroadSoft server. ##The default value is 60.Integer from 2 to 43200 directory.update_time_interval = ####################################################################################### ## BSFT UC ## ####################################################################################### ###Only T46G/T48G Models support these parameter features.uc_enable = features.uc_password = features.uc_username = ####################################################################################### ## Features Pickup(Except T20P model) ## ####################################################################################### ##It enables or disables the phone to display the GPickup soft key when the phone is in the pre-dialing screen. ##0-Disabled,1-Enabled. ##The default value is 0. features.pickup.group_pickup_enable = ##It configures the group call pickup code. ##The default value is blank. features.pickup.group_pickup_code = ##It enables or disables the phone to display the DPickup soft key when the phone is in the pre-dialing screen. ##0-Disabled,1-Enabled. ##The default value is 0. features.pickup.direct_pickup_enable = ##It configures the directed call pickup code. ##The default value is blank. features.pickup.direct_pickup_code = ##It enables or disables the phone to display a visual alert when the monitored user receives an incoming call. ##0-Disabled,1-Enabled. ##The default value is 0. features.pickup.blf_visual_enable = ##It enables or disables the phone to play an audio alert when the monitored user receives an incoming call. ##0-Disabled,1-Enabled. ##The default value is 0. features.pickup.blf_audio_enable = ####################################################################################### ## Call Park(Except T20P model) ## ####################################################################################### ###It enables or disables the phone to display the Park soft key during a call. ###0-Disabled,1-Enabled. ###The default value is 0. call_park.enable = ###It enables or disables the phone to display the GPark soft key during a call. ###0-Disabled,1-Enabled. ###The default value is 0. call_park.group_enable = ###It enables or disables the phone to play a warning tone when a call is parked against its line. ###0-Disabled,1-Enabled. ###The default value is 0. call_park.park_ring = ###It enables or disables the phone to display a parked indicator when a call is parked against its line. ###0-Disabled,1-Enabled. ###The default value is 0. call_park.park_visual_notify_enable = features.call_park.group_park_code = features.call_park.park_code = features.call_park.park_mode = features.call_park.park_retrieve_code = ####################################################################################### ## Time ## ####################################################################################### ##It configures the time zone.For more available time zones, refer to Time Zones on page 215. ##The default value is +8. local_time.time_zone = ##It configures the time zone name.For more available time zone names, refer to Time Zones on page 215. ##The default time zone name is China(Beijing). local_time.time_zone_name = local_time.ntp_server1 = local_time.ntp_server2 = ##It configures the update interval (in seconds) when using the NTP server. ##The default value is 1000.Integer from 15 to 86400 local_time.interval = ##It enables or disables daylight saving time (DST) feature. ##0-Disabled,1-Enabled,2-Automatic. ##The default value is 2. local_time.summer_time = ##It configures the way DST works when DST feature is enabled. ##0-DST By Date ,1-DST By Week. ##The default value is 0. local_time.dst_time_type = ##It configures the start time of the DST. ##Value formats are:Month/Day/Hour (for By Date),Month/ Day of Week/ Day of Week Last in Month/ Hour of Day (for By Week) ##The default value is 1/1/0. local_time.start_time = ##It configures the end time of the DST. ##Value formats are:Month/Day/Hour (for By Date),Month/ Day of Week/ Day of Week Last in Month/ Hour of Day (for By Week) ##The default value is 12/31/23. local_time.end_time = ##It configures the offset time (in minutes). ##The default value is blank.Integer from -300 to 300 local_time.offset_time = ##It configures the time format.0-12 Hour,1-24 Hour. ##The default value is 1. local_time.time_format = local_time.date_format = ##It enables or disables the phone to update time with the offset time obtained from the DHCP server. ##It is only available to offset from GMT 0.0-Disabled,1-Enabled. ##The default value is 0. local_time.dhcp_time = ##It configures the phone to obtain time from NTP server or manual settings.0-Manual,1-NTP ##The default value is 1. local_time.manual_time_enable = ##It enables or disables the phone to use manually configured NTP server preferentially. ##0-Disabled (use the NTP server obtained by DHCP preferentially),1-Enabled. ##The default value is 0. local_time.manual_ntp_srv_prior = auto_dst.url = ####################################################################################### ## NETWORK ## ####################################################################################### ##It configures the IP address mode.0-IPv4,1-IPv6,2-IPv4&IPv6 ##The default value is 0.It takes effect after a reboot. network.ip_address_mode = network.ipv6_prefix = network.ipv6_internet_port.type = network.ipv6_internet_port.ip = network.ipv6_internet_port.gateway = network.ipv6_primary_dns = network.ipv6_secondary_dns = ####Only T46G Model supports this parameter network.ipv6_icmp_v6.enable = network.internet_port.type = network.internet_port.ip = network.internet_port.mask = network.internet_port.gateway = network.primary_dns= network.secondary_dns = ####################################################################################### ## V80 Add ## ####################################################################################### ## Add Time 2015.6.26 account.X.callerid_in_support_header.enable = account.X.acd.auto_login_enable = account.X.outbound_proxy_fallback_interval = account.x.transfer_refer_to_contact_header.enable = account.x.sub_fail_retry_interval = account.X.update_ack_while_dialing = account.x.end_call_when_transferred.enable = account.x.nat.stun_refresh_timer = account.x.contact_take_line_param = account.X.backup_outbound_host = account.X.backup_outbound_port =